Power Dynamics, Inc.
| UnFiltered | |||
|---|---|---|---|
 |
Universal snap-in tabs allow for insertion into a wide variety of panel thicknesses. Conforms with all international safety requirements. |
 |
10A/250VAC |
  |
15A/250VAC | ||
 |
Combination power cord connector with printed circuit terminals. Conforms with all international safety requirements. For automated and hand assembly operations. |
|
10A/250VAC |
|
15A/250VAC | ||
 |
Miniature power connector, in accordance with DIN 49455 and CEE 22 standards. Available with solder terminals. |
    |
2.5A/250VAC |
 |
General purpose power cord connector with printed circuit terminals. Conforms with all international safety requirements. |
 |
10A/250VAC |
|
15A/250VAC | ||
 |
Double fuse holder power cord connector for international markets. Fuse holders touch proof in accordance with international product safety requirements. |
 |
10A/250VAC |
 |
Combination power cord connector with printed circuit terminals. Conforms with all international safety requirements. |
|
10A/250VAC |
|
15A/250VAC | ||
 |
Australian power cord connector panel mount, screw lug termination. Meets Department of Fair Trading requirements. |
|
13A/250VAC |
| 42R01 42R02 42R03
|
General purpose power cord connector. Screw, quick connect, or solder lug terminal configuration. Designed for versatile mounting. Available in screw or snap-in panel mount and eight mounting configurations. |
 |
10A/250VAC |
 |
15A/250VAC | ||
 |
Same features as 42R44 but with voltage selector. Change voltages by rotating fuse cartridge. Meets all international safety requirements. |
|
10A/250VAC |
 |
Combination power cord connector designed for recessed and rack or panel mounting. Conforms with all international product safety requirements. |
|
16A/250VAC |
|
20A/250VAC | ||
 |
North American power cord connector. Quick connect, solder and feed thru terminal configurations. Snap-in-panel mount. |
|
15A/125VAC |
| 42R06 42R07 42R08
|
Units are available with screw, quick connect or solder lug terminal configurations. Designed for versatile mounting, 42R06, 42R07 and 42R08 are available in screw or snap-in panel mount and three mechanical mounting configurations. |
|
16A/250VAC |
|
20A/250VAC | ||
| 42R34 42R38
|
Integral combination IEC power cord connector/fuse holder/voltage selector. Meets all international safety requirements; may be used without modification at time of installation. Designed to switch voltages 115, 125, 230, 250 by removing fuse cartridge & rotating to desired voltage, then snapping the cartridge back into connector housing. Fuse holder is touch proof in accordance with international product safety requirements. Series 42R34, accepts one international 5 x 20mm fuse. Series 42R38 accepts one standard 3AG American type fuse. Screw or snap-in mount configurations. |
|
10A/250VAC |
 |
Integral combination IEC power cord connector, fuse holder & On/Off switch. Designed to eliminate discrete purchase, inventory & assembly of individual components. Fuse holder accepts either single or double American or European fuses for maximum versatility (not interchangeable). Fuse connections are externally accessible & isolated from power connections. Single or double pole snap action On/Off switch. Terminal connections are solder lug or quick connect. Meets all international safety requirements. |
|
10A/250VAC |
 |
Combination power cord connector with single or double pole On/Off snap action power switch. Conforms with all international product safety requirements. Designed to eliminate discrete purchase, inventory & assembly of connector & switch. Terminal connectors are solder or quick connect. |
|
10A/250VAC |
|
15A/250VAC | ||
| 42R31 42R32 42R33
|
Combination single fuse holder/power cord connector for domestic & international markets. Fuse holder is touch proof in accordance with international safety requirements. Accommodates one international 5 x 20mm fuse with space for a spare fuse. Terminal connections: screw, quick connect or solder lug. Fuse connections are externally accessible and isolated from power connections. Screw or snap-in mount and five mounting configurations. |
|
10A/250VAC |
 |
Combination single or double fuse holder power cord connector for domestic and international markets. Fuse holder is touch proof in accordance with international product safety requirements. Accepts either American or European fuse for maximum versatility in product applications. Fuse connections are externally accessible and isolated from power connections. Solder lug & quick connect terminal configurations available |
|
10A/250VAC |
 |
Male power cord plug. Contains integral cable clamp strain relief & internal screw type connections. Three mounting angle configurations. |
|
10A/250VAC |
 |
Same features as 42R37 but with voltage selector. Changes voltages by rotating fuse cartridge. Meets all international safety requirements. Fuse holder accepts 3 AG American or 5 x 20mm European fuses. |
|
10A/250VAC |
 |
Integral combination IEC Connector, fuse holder & voltage selector. The voltage selector is designed to switch to four different voltages & provides a simple means to change transformer primary connections. Fuse Holder accepts either single or double European 5 x 20mm or 3 AG American 1/4 x 1 1/4 fuses for maximum versatility in product applications. Fuse connections are externally accessible & isolated from power connections. Connectors are available in quick connect or solder terminals. |
|
10A/250VAC |
 |
Same features as 42R35 but with voltage selector. Meets all international safety requirements. Fuse holder accepts single or double 3 AG or 5 x 20mm fuses for fusing both line and neutral. |
|
10A/250VAC |
 |
General purpose female power cord connector designed for recessed and rack or panel mounting. Available for quick connect and solder terminals. |
|
10A/250VAC |
|
15A/250VAC | ||
 |
All female connector (2 to 6 units). Solder terminals. |
|
10A/250VAC |
|
15A/250VAC | ||
 |
Female power cord plug. Integral cable clamp strain relief & internal screw type connection. Three mounting angle configurations. |
|
10A/250VAC |
 |
General purpose female power cord connector with printed circuit terminals. Conforms with all international safety requirements. |
|
10A/250VAC |
|
15A/250VAC | ||
 |
Same features as 42R40 but with On/Off power switch. Meets all international safety requirements. |
|
10A/250VAC |
| Receptacle plus Switch
|
Integral combination male inlet IEC connector/female outlet connector & On/Off power switch. Designed to eliminate discrete purchase, inventory & assembly of individual components. Meets all international safety requirements. Unit allows for a cost effective method of providing auxiliary power to peripheral equipment. Switch is rated 10 amp., 250 VAC, double pole; labeled with the international I/O on/off markings. |
|
10A/250VAC |
|
15A/250VAC | ||
| 43R02 43R03 43R04
|
General purpose female power cord connector. Three terminal configurations: screw, quick connect & solder lug. Designed for versatile mounting. Screw or snap-in panel mount. Three mounting configurations. |
|
10A/250VAC |
|
15A/250VAC | ||
 |
Allows for a selection of 1 male inlet with 1 to 6 female outlets. Accepts European style fuse only, 5 x 20mm. Simple snap-in mounting. |
|
10A/250VAC |
| Filtered | |||
 |
General purpose filter with IEC connector providing effective line-to-ground noise up to 10amp., 250VAC .250 Quick Connect terminals. |
|
1A/250VAC 3A/250VAC 6A/250VAC 10A/250VAC |
 |
General purpose filter with IEC connector providing effective line-to-ground noise up to 10amp., 250VAC Solder terminals. |
|
1A/250VAC 3A/250VAC 6A/250VAC 10A/250VAC |
 |
General purpose filter with IEC connector providing effective line-to-ground noise up to 10amp., 250VAC .250 Quick Connect terminals. |
|
1A/250VAC 3A/250VAC 6A/250VAC 10A/250VAC |
 |
General purpose filter with IEC connector providing effective line-to-ground noise up to 10amp., 250VAC Solder terminals. |
|
1A/250VAC 3A/250VAC 6A/250VAC 10A/250VAC |
 |
HGN-365 series line filters feature an IEC Connector with an integral fuse holder; available for one or two 5 x 20 mm fuses. (IEC 601 prescribes fusing of both lines.) Fully enclosed metal housing prevents input of high frequency noise and protects ultra-sensitive equipment. |
|
1A / 2A / 4A 250V/50Hz 110V/60Hz |
|
6A 250V/50Hz 110V/60Hz |
||
 |
HGN-367 series line filters feature an IEC Connector with an integral fuse holder and distance switch; available for one or two 5 x 20 mm fuses. (IEC 601 prescribes fusing of both lines.) Unlike other inferior distance switches, the HGN-367 incorporates Steel Band Ribbon Technology which increases the maximum bending radius of the distance switch so that it can be mounted at virtually any location. Fully enclosed metal housing prevents input of high frequency noise and protects ultra-sensitive equipment. |
|
1A / 2A / 4A 250V/50Hz 110V/60Hz |
 |
HGN-375 protects electronic equipment from common and differential mode line interference in the range of 10KHz up to 30MHz. This "combi-unit" is equipped with IEC Connector, fuse holder for one or two 5 x 20 mm fuses, 2 pole on/off switch and fully enclosed metal housing. |
|
1A / 2A / 4A 250V/50Hz 110V/60Hz |
|
6A 250V/50Hz 110V/60Hz |
||
 |
HGN-336 line filters feature an IEC Connector and a two pole on/off switch. The unit protects electronic equipment against malfunction due to fast common mode and differential mode interferences. Designed for labor saving snap-in mounting. |
|
1A / 2A / 4A / 6A 250V/50Hz 110V/60Hz |
 |
HGN-368 series line filters feature an IEC Connector with an integral switch. Fully enclosed metal housing prevents input of high frequency noise and protects ultra-sensitive equipment. |
|
1A / 2A / 4A / 6A 250V/50Hz 110V/60Hz |
 |
HGN-339 incorporates all the features of the HGN-337 with the addition of an integral voltage selector. It is designed for use in equipment intended for export enabling the fast change to other voltages. |
|
1A / 2A / 4A / 6A 250V/50Hz 110V/60Hz |
 |
HGN-337 line filter modules feature a combination IEC Connector, two pole on/off switch and fuse holder that accepts both European 5 x 20 mm or 3 AG fuses in-line and neutral. The HGN-337 protects electronic equipment from common mode and differential mode interferences. |
|
1A / 2A / 4A / 6A 250V/50Hz 110V/60Hz |
 |
HGN-341 power modules feature IEC Connector, two pole on/off switch, fuse holder that accepts both European 5 x 20 mm or 3 AG fuses and a voltage selector with four different voltages. The voltage selector is designed to provide a simple means to change transformer primary connections. |
|
1A / 2A / 4A / 6A 250V/50Hz 110V/60Hz |
 |
HGN-369 line filters are used in applications having ON/OFF-switch on front-side but main input at the rear-side. IEC-connector, voltage-selector for four different voltages, fuse holder (5 x 20 mm or 3 AG optionally) and a highly efficient filter in a totally enclosed metal housing to ensure maximum protection from common mode and differential mode interferences. |
|
1A / 2A / 4A / 6A 250V/50Hz 110V/60Hz |
| Filter Only | |||
 |
Low cost, solder terminal filter module. |
|
1A / 2A / 6A / 10A 250V/60Hz |
 |
Low cost, printed circuit terminal filter module. |
|
1A / 2A / 6A / 10A 250V/60Hz |
 |
Superior preformance controlling EMI suppression of both line-to-line and line-to-ground noise. |
(VDE submitted) |
5A / 10A / 15A / 20A 250V/60Hz |
 |
Two stage filters designed to provide high performance in suppressing both line-to-line and line-to-ground noise for most digital electronic equipment. |
(VDE submitted) |
1A / 2A / 6A / 10A 250V/60Hz |
 > |
General purpose hi current filter with IEC 60320 connector for direct plug-in capabilities. Designed to replace filters that require wiring between filter and panel inlet. Fully enclosed metal case prevents input of hi frequency noise and protects sensitive equipment. |
|
15A / 16A 250V/60Hz |
 |
High performance 3 phase line filters available in 16A, 32A, 50A and 100A versions. Compact construction makes it ideal for many applications including: electrical equipment, copy machines, non-interrupting power supplies (UPS), telecommunication equipment and motor drives. Designed with high insertion loss at frequencies from 1MHz to 30MHz. |
|
16A / 32A / 50A / 100A 250V/60Hz |
 |
Superior performance controlling EMI suppression of both line-to-line and line-to-ground noise. |
(VDE submitted) |
5A / 10A / 15A / 20A 250V/60Hz |
 |
Two stage filters designed to provide high performance in suppressing both line-to-line and line-to-ground noise for most digital electronic equipment. |
(VDE submitted) |
1A / 2A / 6A / 10A 250V/60Hz |
 |
Both common mode and normal mode are high noise rejection. |
(VDE submitted) |
5A / 10A / 15A / 20A 250V/60Hz |
 |
Both common mode and normal mode are high noise rejection. |
(VDE submitted) |
5A / 10A / 15A / 20A 250V/60Hz |
 |
Two stage filters designed to provide high performance in suppressing both line-to-line and line-to-ground noise for most digital electronic equipment. |
(VDE submitted) |
5A / 10A / 15A / 20A 250V/60Hz |
 |
Two stage filters designed to provide high performance in suppressing both line-to-line and line-to-ground noise for most digital electronic equipment. |
(VDE submitted) |
5A / 10A / 15A / 20A 250V/60Hz |
