Hamburg, Illinois 62045
(618) 232-1139
(618) 232-1172 fax
 |
COMPACT STEPPING MOTORS: TS Series |
| COMPACT DIRECT DRIVE OR GEARED, PERMANENT MAGNET STEPPING MOTORS | |
Compact, rugged and efficient, TS Series motors are designed for heavy-duty applications. Geared models offer hardened steel gears and pinions with dynamic torque ratings up to 250 ounce-inches. Direct drive models have a 7.5° step angle and both geared and direct drive motors have machined die cast housings. Sleeve bearings are standard.
Output shaft step angles as small as .025° at a reduction of 300 are available.
NOTE
1. Standard TS motors are supplied with 4-phase, bifilar windings (6 lead wires) for 6, 12, 24 VDC operation. Click here for standard lead wire color code and switching sequence.
2. TS Series motors can be driven with the Hurst Stepping Motor Controllers .
| Geared Stepping Motors | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Model | Part Number |
Reduction | Step Angle (degrees) |
Steps Per Revolution |
Output Speed @ 200 p/s (rpm) |
Typical Torque @ 200 p/s (oz-in)* |
Input Power (watts) |
Winding Resistance (ohms) |
Weight (oz) |
| TS | 2606-007 | 10 | 0.75 | 480 | 25 | 35 | 8.5 | 31 | 27 |