Beckwith Electronics


Hamburg, Illinois 62045
(618) 232-1139

(618) 232-1172 fax

Contact Us

Premier Metal

Accessories

Turrets

For 19 and 24 Inch Panels
All turrets may be mounted on any of their three panel openings to vertical and pedestal frames for optimum viewing angles in sitting or standing positions. Frames are 16-gauge steel, completely welded. All panel openings are drilled and tapped for 10-32 screws on standard EIA spacing in a 1/2 inch recess. Turrets may be ganged for console assemblies. Furnished with flat steel side panels. Finished in all Premier standard colors. If not specified, Smoke Blue Textured "Sandtex" frame and panels are furnished.

Ordering Information
Width
Inches)
Height
(Inches)
Depth
(Inches)
Sloped
Front Panel
Space
(Inches)
Rear
Space
Panel
(Inches)
Bottom
Space
Panel
(Inches)
Catalog
Number
22 9 3/4 21 14 x 19 7 x 19 17 1/2 x 19 TUR-1-19
27 9 3/4 21 14 x 24 7 x 24 17 1/2 x 24 TUR-1-24
22 12 1/4 171/2 17 1/2 x 19 8 3/4 x 19 14 x 19 TUR-3-19
27 12 1/4 17 1/2 17 1/2 x 24 8 3/4 x 24 14 x 24 TUR-3-24

Discontinued for reference only

For Trimline Series

Turrets may be mounted to frames or used individually on any of their three panel openings for optimum viewing angles. Pnel mounting spaces are recessed 1/2 inch. Holes are tapped for 10-32 screws on EIA spacing. Side panels are furnished.

Ordering Information
Sloped
Panel
Height
(Inches)
Rear
Panel
Height
(Inches)
Bottom
Panel
Height
(Inches)
19 Inch
Panel
Width
Catalog
Number
24 Inch
Panel
Width
Catalog
Number
14 7 17 1/2 TTU-1-19 TTU-1-24
17 1/2 8 3/4 14 TTU-3-19 TTU-3-24

Switch Panel (30°)
Provides excellent visual and manual access for switches, keys, meters, etc. Mounts into standard 5 1/4 inch height panel space. Rear is open for cables. Sloped top panel is standard 8 3/4 panel height, mounting at a 30° angle from horizontal. Bottom is closed. Modification cutouts can be provided on order.

Ordering Information
Nominal Sloped Panel Width
(Inches)
Catalog
Number
19 TST-819-5
24 TST-824-5

Desk Panels

To Fit Standard 19 Inch Desk Rack Cabinets & Cabinet Relay Racks
Construction from 16-gauge steel and bolted to a standard steel panel 10 1/2 x 19 inches. Front corners are rounded. Finished in Light Gray enamel, unless otherwise specified. Shipped knocked down with all necessary hardware for easy assembly.

Ordering Information
Width
(Inches)
Depth
(Inches)
Catalog
Number
22 16 DP-1016
22 20 DP-1020

Formica Writing/Table Tops - FWT Series
These Formica surfaces are for use accross the top of (2) 21 or 311/2 inch cabinet configurations. Available in a standard 11/4 inch thickness and customized to fit your requirements.

Writing Shelves for Trimline & Spartan Series
White Formica - covered particle board mounts over welded support bracket(s) and panel assembly. Unit mounts to standard 5 1/4 inch panel space. These shelves can be used when frames are mounted in a straight line, without the use of the wedge frames.

Ordering Information
 
Frame Width
(Inches)
Shelf Dimensions
Width x Depth
(Inches)
 
Catalog
Number
1 Bay 19 20 5/8 x 18 1/2 TWS-1918
2 Bay 19 42 5/8 x 18 1/2 TWS-3818
3 Bay 19 64 5/8 x 18 1/2 TWS-5718
4 Bay 19 86 5/8 x 18 1/2 TWS-7618
1 Bay 24 25 5/8 x 18 1/2 TWS-2418
2 Bay 24 52 5/8 x 18 1/2 TWS-4818
3 Bay 24 79 5/8 x 18 1/2 TWS-7218
4 Bay 24 86 5/8 x 18 1/2 TWS-9618