BlockMaster

Specifications
Features:

Small 3.5 or 3.81mm spacing.
MTS is green in color with clamp in the open position.
Double captive screws.
Elevator clamp system.
Testing Points.
2 to 25 position single mold/modular.
Housing is resistent to chlorinated solvents, with no dioxin or detrimental to health halogens.
Every position of this product is mechanically and electrically tested during assembly to ensure a 100% defect free product.
Minimum 5 microns of tin plating on terminal for easy soldering.

MTS Series

MTS13A0T

13 Positions
Vertical
Marking A
3,81mm

Electrical

Current: 8A@250V

Wire range: 14 to 30 AWG

Wire section(mm²): 0.05 to 1.5mm²

Pin dimension: 0.9mm x 0.5mm

CR: <15m ohms

IR: >10⁹(500VDC)

Operating temp: -40°C to+110°C

Stripping length: 5mm

Torque: 0.25 Nm

PCB holes: min 1.1mm

PCB thickness: max 1.8mm

Climactic category: 40/110/21 Acc. to IEC 68-1

Materials

Housing: Polyamide 6,6(UL94V-0)

Clamp: Copper alloy, Ni plated

Terminal: Copper alloy, Tin plated

Screw: M2, copper alloy, Ni plated

Colors available: Green

Electrical
Current:	8A@250V
Wire range:	14 to 30 AWG
Wire section(mm²):	0.05 to 1.5mm²
Pin dimension:	0.9mm x 0.5mm
CR:	<15m ohms
IR:	>10⁹(500VDC)
Operating temp:	-40°C to+110°C
Stripping length:	5mm
Torque:	0.25 Nm
PCB holes:	min 1.1mm
PCB thickness:	max 1.8mm
Climactic category:	40/110/21 Acc. to IEC 68-1
Materials
Housing:	Polyamide 6,6(UL94V-0)
Clamp:	Copper alloy, Ni plated
Terminal:	Copper alloy, Tin plated
Screw:	M2, copper alloy, Ni plated
Colors available:	Green

Marking

Adhesive strips not available.
Ink marking by factory (specify in order number):

Factory ink is permanent and will not rub off. Ink has fluorescent tint for greater visibility.: 0 = no printing; A = upside down printing (consecutive #'s R to L); B = regular printing (consecutive #'s L to R)

Selection Table and Drawings