Beckwith Electronics

Hamburg, Illinois 62045
(618) 232-1139

(618) 232-1172 fax

Contact Us



  1. Small 3.5 or 3.81mm spacing.
  2. MTS is green in color with clamp in the open position.
  3. Double captive screws.
  4. Elevator clamp system.
  5. Testing Points.
  6. 2 to 25 position single mold/modular.
  7. Housing is resistent to chlorinated solvents, with no dioxin or detrimental to health halogens.
  8. Every position of this product is mechanically and electrically tested during assembly to ensure a 100% defect free product.
  9. Minimum 5 microns of tin plating on terminal for easy soldering.
MTS Series


3 Positions
Right Angle
Marking A

Wire range:14 to 30 AWG
Wire section(mm2):0.05 to 1.5mm2
Pin dimension:0.9mm x 0.5mm
CR:<15m ohms
Operating temp:-40°C to+110°C
Stripping length:5mm
Torque:0.25 Nm
PCB holes:min 1.1mm
PCB thickness:max 1.8mm
Climactic category:40/110/21 Acc. to IEC 68-1
Housing:Polyamide 6,6(UL94V-0)
Clamp:Copper alloy, Ni plated
Terminal:Copper alloy, Tin plated
Screw:M2, copper alloy, Ni plated
Colors available:Green


Adhesive strips not available.
Ink marking by factory (specify in order number):

Factory ink is permanent and will not rub off. Ink has fluorescent tint for greater visibility.
0 = no printing
A = upside down printing (consecutive #'s R to L)
B = regular printing (consecutive #'s L to R)

Selection Table and Drawings