Beckwith Electronics

Hamburg, Illinois 62045
(618) 232-1139

(618) 232-1172 fax

Contact Us

BlockMaster


Specifications

Features:
  1. Small 3.5 or 3.81mm spacing.
  2. MTS is green in color with clamp in the open position.
  3. Double captive screws.
  4. Elevator clamp system.
  5. Testing Points.
  6. 2 to 25 position single mold/modular.
  7. Housing is resistent to chlorinated solvents, with no dioxin or detrimental to health halogens.
  8. Every position of this product is mechanically and electrically tested during assembly to ensure a 100% defect free product.
  9. Minimum 5 microns of tin plating on terminal for easy soldering.
MTS Series

MTS03000


3 Positions
Vertical
Marking 0
3,5mm

Electrical
Current:8A@250V
Wire range:14 to 30 AWG
Wire section(mm2):0.05 to 1.5mm2
Pin dimension:0.9mm x 0.5mm
CR:<15m ohms
IR:>109(500VDC)
Operating temp:-40°C to+110°C
Stripping length:5mm
Torque:0.25 Nm
PCB holes:min 1.1mm
PCB thickness:max 1.8mm
Climactic category:40/110/21 Acc. to IEC 68-1
Materials
Housing:Polyamide 6,6(UL94V-0)
Clamp:Copper alloy, Ni plated
Terminal:Copper alloy, Tin plated
Screw:M2, copper alloy, Ni plated
Colors available:Green

Marking

Adhesive strips not available.
Ink marking by factory (specify in order number):

Factory ink is permanent and will not rub off. Ink has fluorescent tint for greater visibility.
0 = no printing
A = upside down printing (consecutive #'s R to L)
B = regular printing (consecutive #'s L to R)

Selection Table and Drawings