Beckwith Electronics
Hamburg, Illinois 62045
(618) 232-1139
(618) 232-1172 fax
Contact Us
BlockMaster
Specifications
Features:
- MSM is green in color with clamp in the open position.
- MSE is black in color with clamp in the closed position.
- Captive screws.
- Elevator clamp system.
- Testing holes.
- 2 to 4 position single mold.
- 2 to 24 positions modular.
- Housing is resistant to chlorinated solvents, with no dioxin or detrimental to health halogens.
- Every position of this product is mechanically and electrically tested during assembly to ensure a 100% defect free product.
- Minimum 5 microns of tin plating on terminal for easy soldering.
|
MSM(MSE) Series 
|
MSM20A97
20 Positions
Right Angle
Marking A
7,62mm Spacing
| Electrical |
|---|
| Current: | 17.5A @450V |
| Wire range: | 14 to 30 AWG |
| Wire section (mm2): | 0.05 to 2.5mm2
|
| Pin dimension: | 1mm x 0.8mm |
| CR: | <15m ohms |
| IR: | >109 ohms (500V DC) |
| Operating temp: | -40°C to+110°C |
| Stripping length: | 5.5mm |
| Torque: | 0.5Nm |
| PCB holes: | min 1.4mm |
| PCB thickness: | max 2.8mm |
| Climactic category: | 40/110/21 Acc. to IEC 68-1 |
| Materials |
|---|
| Housing: | Polyamide 6, 6 (UL94V-0) |
| Clamp: | Copper Alloy, Ni plated |
| Terminal: | Copper Alloy, Tin plated |
| Screw: | M3, copper alloy, Ni plated |
| Colors Available: | Green (MSM-open), Black (MSE-closed) |
| Marking |
|---|
| Adhesive marking strips 7.5 and 7.62mm centers. |
| Numbered | Order Number |
|---|
| 1-10 | ESA34000110 |
| 11-20 | ESA34001120 |
| 21-30 | ESA34002130 |
Ink marking by factory (specify in order number):
- Factory ink is permanent and will not rub off. Ink has fluorescent tint for greater visibility.
- 0 = no printing
- A = upside down printing (consecutive #'s R to L)
- B = regular printing (consecutive #'s L to R)
Custom markings are welcome with minimum order.
Contact BECKWITH ELECTRONICS for more information.
Selection Table and Drawings