BlockMaster

Specifications
Features:

MSB is green in color with clamp in the open position.
MEB is black in color with clamp in the closed position.
Double captive screws.
Elevator clamp system.
Testing holes/points.
2 to 12 position single mold.
2 to 36 position modular.
2 position blocks can be ordered with clamping pegs to reduce torque levels on the board and surpass VDE standards.
Housing is resistant to chlorinated solvents, with no dioxin or detrimental to health halogens.
Every position of this product is mechanically and electrically tested during assembly to ensure a 100% defect free product.
Minimum 5 microns of tin plating on terminal for easy soldering.

MSB (MEB) Series

MSB27A91

27 Positions
Right Angle
Marking A
5mm Spacing

Electrical

Current: 13.5A@300V

Wire range: 16 to 30AWG

Wire section (mm²) 0.05 to 1.5mm²
Pin dimension: 0.9mm x 0.5mm

CR: <15m ohms

IR: >10⁹ohms (500V DC)

Operating temp: -40°C to+110°C

Stripping length: 5mm

Torque: 0.5 Nm

PCB holes: min 1.1mm

PCB thickness: max 2.4mm

Climactic category: 40/110/21 Acc. to IEC 68-1

Materials

Housing: Polyamide 6.6(UL94V-0)

Clamp: Copper alloy, Ni plated

Terminal: Copper alloy, Tin plated

Screw: M3 Copper alloy, Ni plated

Colors available: Green (MSB-open), black (MEB-closed)

Electrical
Current:	13.5A@300V
Wire range:	16 to 30AWG
Wire section (mm²)	0.05 to 1.5mm²
Pin dimension:	0.9mm x 0.5mm
CR:	<15m ohms
IR:	>10⁹ohms (500V DC)
Operating temp:	-40°C to+110°C
Stripping length:	5mm
Torque:	0.5 Nm
PCB holes:	min 1.1mm
PCB thickness:	max 2.4mm
Climactic category:	40/110/21 Acc. to IEC 68-1
Materials
Housing:	Polyamide 6.6(UL94V-0)
Clamp:	Copper alloy, Ni plated
Terminal:	Copper alloy, Tin plated
Screw:	M3 Copper alloy, Ni plated
Colors available:	Green (MSB-open), black (MEB-closed)

Marking

Adhesive marking strips 5 and 5.08mm centers.

Numbered Order Number

1-10 ESA014000110

11-20 ESA014001120

21-30 ESA014002130

31-40 ESA014003140

41-50 ESA014004150

Marking
Adhesive marking strips 5 and 5.08mm centers.
Numbered	Order Number
1-10	ESA014000110
11-20	ESA014001120
21-30	ESA014002130
31-40	ESA014003140
41-50	ESA014004150

Ink marking by factory (specify in order number):

Factory ink is permanent and will not rub off. Ink has fluorescent tint for greater visibility.: 0 = no printing; A = upside down printing (consecutive #'s R to L); B = regular printing (consecutive #'s L to R)

Selection Table and Drawings