Beckwith Electronics

Hamburg, Illinois 62045
(618) 232-1139

(618) 232-1172 fax

Contact Us

BlockMaster


Specifications

BlockMaster Electronics is proud to introduce our newest series of exciting products: Panel Feed-Through Terminal Blocks. The Panel Feed-Through Series allows the designer to completely separate the electrical element of a product from the outside world or field connections. In many new designs of motor drives and switching power supplies, it is desirable to separate "noisy" electronics from the outside world. For products such as medical imaging, motion and robotic control motor generator sets, and various high power switching outputs that must meet domestic and international EMI/RFI requirements, our Panel Feed-Through Series is the answer.

Field wiring is outside your enclosure and your products' circuits can be inside a shielded cabinet or box. The MPT line of Feed-Through Terminal Blocks is available with ratings from 24A/450V to 150A/1000V in a series of 10 unique modules. A variety of push-on tab, solder and screw terminations are also available.

Standard color is gray with various other NEMA colors available on special order. Mounting to panels is accomplished with knurled-nut, snap-on wedges or mounting screws depending on the current rating of the module. The individual modules may be snapped together to make a multiple connection module.

MPT275

Panel Feed-Through T. Blocks

Snap-On Mounting Clips

Technical Data
Pitch7,5mm
Poles1 (Modular)
Current24A
Voltage450V
Test Voltage2,5 kVrms/60s
Recommended Torque0.5Nm / 4.5in.lbs.
Wire Strippingmax 10mm
Max Wire Section2.5mm2 Stranded 14AWG
4.0mm2 Solid 12AWG
2x1.5mm2 Solid 2x16AWG
Operating Temperature-30°C to +130°C
Approvals
 
EN60998

EN60998

UL1058
C22-No158

Current24A24A24A Factory
15A Field
Voltage450V450V300V
Wire Section2.5mm22.5mm214-30AWG
Torque.5Nm.5Nm4.5LB-in
FileCA02.00600N.40014733E178356
Materials
HousingPA - UL 94 V0
Screw
M3 Captive
Galvanized Steel
ClampNickel Copper Alloy
TerminalTin-Plated Coper Alloy
How to Order
* Custom Code - Assigned by BlockMaster
# Colors To be Specified Just in Case it is Different from the Standard
(1) Configurations of higher number of poles are obtainable using modular
versions only. In order to avoid interference between the pin and the pcb,
the terminal row should be interrupted when the number of positions exceeds 30.