Hamburg, Illinois 62045
(618) 232-1139
(618) 232-1172 fax

Aim Electronics

Most of these are Discontinued
We May Have Some Stock Still Available

Features
1. Soldered backplate provides 130 dB RF Shielding.
2. Printed circuit network ensures performance up to 1 GHz
3. Specialty plated Zinc alloy housing for excellent corrosion resistance.
4. 1/2" machined "F" Ports with 360° sealing sleeves.
5. Port spacing allows easy installation of security shields.

ALSO AVAILABLE: 3 & 4 WAY ULTRA SPLITTERS

SPECIFICATIONS:

40-2050 MHz SATELLITE COMBINER/SPLITTERS
12-3304 Compact Combiner/Splitter 12-3303 Combiner/Splitter with Ground Port and Grounding Screw 12-3305 Weather Proof Combiner/Splitter with Ground Port. Supplied with 3 Rubber Boots and Mast Mount Hardware	Features Allows off-air signals (54-860MHz) and satellite signals (950-2050MHz) to be fed on a single cable. Can be used for separating signals as a splitter or combining signals as a combiner. DC Power Pass is provided from the satellite port to the input in order to pass satellite receiver LNB voltage as shown below. Model 12-3305 is designed for outdoor use and is supplied with rubber boots to cover up all ports when being installed with weatherproof connections. Recommended to use 25-7066 GEL "F" connectors for secured weather proofing. 12-3305 features a specially designed housing to meet FCC regulations for -130dB RFI Shielding The 12-3305 housing is designed for either Wall-Mount or Mast Mount. Can accept either 1-1 1/2" to 2" mast pole.
	Specifications: Satellite IF Port Pass Band: 950-2050MHz Thru Loss: 2.8 dB Max. Return Loss: 10 dB Stopband Attenuation: 860 MHz 32 dB   806 MHz 40 dB   750 MHz 35 dB DC Pass to In/Out: Yes SPECIFICATIONS: UHF/VHF PORT Pass Band: 40-860MHz Thru Loss: 1.0 dB Max. Return Loss: 10 dB Stopband Attenuation: 950 MHz 30 dB   1000 MHz 45 dB   1100 MHz 45 dB Impedance: 75 Ohms Connectors: F-Female DC Pass to In/Out: No
	Hook-up Diagrams Single TV/Single Receiver Dual TV/Dual Receiver NOTE: Type 12-3304 could be used in installations where space limitations exist. Type 12-3305 is designed for outdoor, weatherproof installations.
FOR RESIDENTIAL AND LIGHT INDUSTRIAL INSTALLATIONS
Discontinued for reference only 10 dB Gain Amplifier  13-5910 20 dB Gain Amplifier  13-5920 Power Inserter 13-5946 Power Supply 120 VAC - 12 VDC 200 MA  13-5948 10 dB Gain Inline Amplifier  13-5947	TYPICAL RESIDENTIAL INSTALLATION DIAGRAM SPECIFICATIONS: Part Number 13-5910/13-5947 13-5920 13-5946 Bandwidth: 40-1000 MHz Gain: 10 dB 20 dB   Flatness: +1.5 dB +1.5 dB 0.05 dB Max. Noise Figure Typical 6 dB 6 dB   Maximum 7 dB 7 dB   Return Loss: 15 dB 15 dB 15 dB Max. Output: +25 dBmV +35 dBmV   Min. Input: -10 dBmV -10 dBmV   RFI Isolation: -120 dB -120 dB   Channel Capability: 150 150 -    Power Transformer: USE 13-5948 USE 13-5948
VHF / UHF & MMDS (MULTI-CHANNEL DISTRIBUTION SERVICE) COMBINERS
Passive Combiner 12-3701 NOTE: AIM # 12-3703 SAME AS 12-3701 BUT PASSIVE TO ALL PORTS Active Combiner 12-3702 (Use only with Power Inserter 13-5948 for VHF/UHF Amplification)	The 12-3701 and 12-3702 allows MMDS wireless signals and the local UHF/VHF off-air signals to be combined onto one cable entering the home, while preventing the MMDS aeronautical band signals from radiating backwards through the off-air antenna. Filtering on the MMDS input eliminates spurious down converter products from interfering with the off-air channels. The 12-3701 provides highpass filtering for the wireless MMDS Super band input channels. The 12-3702 provides highpass filtering for the wireless MMDS Super-band input channels and the UHF/VHF antenna input is amplified by a low noise amplifier which provides a net gain of 4dB after the high isolation combiner circuit. The directional amplifier prevents MMDS radiation from the UHF/VHF antenna. Features Zinc diecast case for outdoor use. Filters MMDS spurious signals. Prevents MMDS signal leakage to UHF/VHF antenna. Power passive to MMDS block converter. DC blocked to the UHF/VHF antenna. Applications Separation of VHF/UHF signals and MMDS signals. High isolation combining of VHF/UHF antenna and a wireless MMDS block converter.
	SPECIFICATIONS: Part Number 12-3701 Bandwidth:  VHF/UHF 54-216 MHz 470-870 MHz Insertion Loss: 4.0 dB 4.0 dB Bandwidth:  (MMDS) 116-128 MHz 222-408 MHz Insertion Loss: 4.0 dB 6.5 dB Port to Port Isolation: 40 dB Min. 400B Min. Spurious Rejection:   Ch. 2-6 Ch. 7-9   15 dB 28 dB Port to Port Isolation: 30 dB Min.   Power Passing on MMDS input only       12-3702 Bandwidth:  VHF/UHF 54-216 MHz 470-870 MHz Gain: 10 dB 10 dB Noise Figure: 4.5 dB 4.5 dB Bandwidth:  (MMDS) 116-128 MHz 282-408 MHz Insertion Loss: 4.5 dB 6.5 dB Spurious Rejection: Min. Ch. 7-11 Ch. 12 Ch. 13 35 dB 20 dB 15 dB Port to Port Isolation: 40 dB Min.   Power Passing on MMDS input only
	TYPICAL INSTALLATION DIAGRAM
No Picture Available	ULTRA SPLITTER 5 MHz - 1GHz

Part # 70-1002
Bandwidth - MHz	5 - 20	20 - 400	400 - 600	600-1000
Insertion Loss	3.5	3.8	4.0	4.4
Isolation	20	24	24	22
Return Loss	15	20	20	18

MATV / TV DIE CAST-INDOOR OUTDOOR-WEATHERPROOF UHF/VHF/FM-5-900 MHZ CO-AXIAL SPLITTERS
2 Way Mini Splitter	Description	Bulk	Packaged
	5-900 MHz 20db Isolation 3.5db Insertion Loss DC Passive	11-4110	11-4110P (packaged)
2 Way Splitter	5-900 MHz 20db Isolation -3.5db Insertion Loss DC Passive	11-4120	11-4120P (packaged)
3 Way Splitter	Loss 2 @ 6.5db 1 @ 3.5db -20db Isolation DC Passive 5-900MHz	11-4130	11-4130P (packaged)
4 Way Splitter	5-900 MHz 30db Isolation 3.5db Insertion Loss DC Passive	11-4140	11-4140P (packaged)
5-900 MHz SPECIAL TYPE CO-AXIAL SPLITTERS
6 Way CO-Axial Splitter 82 Channel UHF/VHF/FM	Die Cast Metal Case High Isolation Power Passive 8 db Insertion Loss	11-4060	11-4060P (packaged)
8 Way CO-Axial Splitter 82 Channel UHF/VHF/FM	Die Cast Metal Case High Isolation Power Passive 11db Insertion Loss	11-4080	11-4080P (packaged)
UHF/VHF/FM Tap Off	1 Input 2 Output, Idea for Multi-Outlet System and Extended Drop Tap System Fits into Single Gang Box with any Wall Plate with 3/8" Opening	11-4650	11-4650P (packaged)
	Description	Bulk	Packaged
	2 Way Insertion Loss: 3.5db	11-4820
	3 Way Insertion Loss: 2 @ 6.5db 1 @ 3.5db	11-4830
	4 Way Insertion Loss: 6.5db	11-4840
AC/DC Power Path clearly marked from Input to Output AC/DC Power Path via Induction Coil from Input to One Output 11-4820, 11-4830, 11-4840 Available in Bulk Only - 25 per box Power Blocking from Input to all Remaining Outputs 30 db Isolation Bandwidth 5-900 MHz
MATV / TV / VCR -UHF / VHF / FM -5-900 MHz CO-AXIAL DROP TAPS
11-4310 Series	Description	Stock #	Isolation
	1 In - 1 Out - 1 Tap	11-4310-12 11-4310-17 11-4310-23	12db 17db 23db
11-4320 Series	1 In - 1 Out - 2 Tap	11-4320-12 11-4320-17 11-4320-23	12db 17db 23db
11-4340 Series	1 In - 1 Out - 4 Tap	11-4340-12 11-4340-17 11-4340-23	12db 17db 23db
Plated Metal Case-Available in 12, 17 or 23db Holes for Mounting, 82 Channel UHF/VHF/FM Low Loss High Isolation Power Passive
Discontinued for reference only 11-4510 Series Indoor - Outdoor VHF-FM Coupler & Drop Tap	Please specify Isolation When Ordering 5-900 MHz High Isolation Constant 75 Ohm Impedance Anti-Corrosion Finish Available in 8 Isolations Designed for Wall Plate Mounting	11-4510-6 11-4510-9 11-4510-12 11-4510-16 11-4510-20 11-4510-24	6db 9db 12db 16db 20db 24db

CATV SPLITTERS & DROP TAPS
PREMIUM SPLITTERS 5-600 MHz
Features: Special zinc alloy housing for excellent corrosion resistance Staked back plate provides 100 db RF1 shielding Machined Threads Port spacing allows easy installation of security shields
Specifications:
	Bandwidth-MHz	5-50	50-400	400-500	500-600
2 Way Splitter Stock #70-2002	Insertion Loss	3,4	3.4	3.5	4.0
	Isolation	26	28	26	24
	Return Loss	26	25	26	22
3 Way Splitter Stock #70-2003	Insertion Loss	5.0	5.5	5.5	5.6
	Isolation	30	28	26	20
	Return Loss	22	22	18	18
4 Way Splitter Stock #70-2004	Insertion Loss	7.0	7.0	7.0	7.5
	Isolation	30	28	28	24
	Return Loss	22	20	20	18
8 Way Splitter Stock #70-2008	Insertion Loss	10.0	10.5	10.5	10.8
	Isolation	27	28	28	24
	Return Loss	18	16	16	14
ULTRA SPLITTERS 5 MHz - 1 GHz
Specifications:
2 Way Splitter Stock #70-1002	Insertion Loss	3.5	3.8	4.0	4.4
	Isolation	20	24	24	22
	Return Loss	15	20	20	18
3 Way Splitter Stock #70-1003	Insertion Loss	5.5	5.5	6.0	6.0
	Isolation	23	25	25	20
	Return Loss	16	18	18	16
4 Way Splitter Stock #70-1004	Insertion Loss	7.0	7.0	7.5	8.2
	Isolation	20	25	22	20
	Return Loss	15	18	18	15

CO-AXIAL DROP TAPS DT Indoor/Outdoor Directional Coupler DTW Designed for Wall Plate Mounting Features: Indoor/Outdoor High Quality Zinc Diecast Housing Anti-Corrosion Chromate Finish Provides over 100 db RF Shielding Bandwidth 5 to 600 MHz Stock # Value DT DTW 6dB 70-3000-6 70-3200-6 9dB 70-3000-9 70-3200-9 12dB 70-3000-12 70-3200-12 16dB 70-3000-16 70-3200-16 20dB 70-3000-20 70-3200-20 24dB 70-3000-24 70-3200-24 27dB 70-3000-27 70-3200-27 30dB 70-3000-30 70-3200-30 Tap Values 6 dB 9 dB 12 dB 16 dB 20 dB 24 dB 27 dB 30 dB Insertion Loss Max 2.2 1 1 1 .5 .5 .5 .5 Isolation (Output) to Tap 26 28 35 35 40 40 40 40 Return Loss Nominal 15 16 20 20 20 20 20 20

SATELLITE/DBS Heavy Gold Colored Aluminum Case Precision Machined Threaded Connectors
5-2050 MHz NON-AMPLIFIED
12-3402    2 Way	Thru Loss:	Isolation: (min.)	Return Input Loss:	Return Output Loss:
	5 db	12 db	5 db	5 db
12-3404    4 Way	9 db	10 db	5 db	2 db
12-3408    8 Way	14 db	11 db	2 db	2 db
5-2050 MHz AMPLIFIED
12-3502    2 Way	Minimum Gain:	Isolation:	Noise:	Operating Power:
	2 db	15 db	5 db	15 to 18 VDC
12-3504    4 Way	3 db	15 db	5 db	15 to 18 VDC
12-3508    8 Way	6 db	10 db	5 db	15 to 18 VDC
This new Gold Series Satellite Splitters have a built in zener diode circuit to protect DC return back to the TV side and can be used in installations requiring splitters power passive to one port. All specifications are dependent on the frequency range being used.
SATELLITE/DBS HIGH FREQUENCY SPLITTERS AND DROP TAPS
40-2050 MHz POWER PASSIVE TO ONE PORT
Discontinued for reference only 12-4772    2 Way	Thru Loss:	Isolation:	Input Loss:	Output Loss:
	3.4 db	11 db	12 db	13 db
12-4774    4 Way	6.6 db	14 db	12 db	13 db
40-2050 MHz POWER PASSIVE TO ALL PORTS
12-4782    2 Way	4 db	29 db	12 db	13 db
12-4784    4 Way	6.7 db	14 db	12 db	13 db

SATELLITE/DBS HIGH FREQUENCY DROP TAPS
DROP TAPS  5-2050 MHz   VHF/UHF & SATELLITE
	12-3601 Series    1 Way	12-3601-12  12db 12-3601-15  15db 12-3601-20  20db
	12-3602 Series    2 Way	12-3602-12  12db 12-3602-15  15db 12-3602-20  20db
	12-3604 Series    4 Way	12-3604-12   12db 12-3604-15    15db 12-3604-20    20db
Water Proof - 12, 15, 20 db values - One Port Power Passive Precision Machined Threaded Ports - Zinc Die Cast Nickel Plated Housing

SATELLITE IF-VHF/UHF DIPLEXER (COMBINER-SPLITTER)
12-3303 40-2050 MHz Sends Satellite and Terrestrial TV Signals along the same Cable Avoids Extra Cabling Diecast Waterproof Case
Specifications:
Impedance:	V.S.W.R.:	Insertion Loss (db Max.):	Isolation (db Min.):
In-75 Ohms Out - 75 Ohms	VHF - 1.5 UHF - 1.5 950-2050 MHz 1.5	VHF - 0.5 UHF - 0.5 950-2050 MHz - 0.8	VHF - 25 UHF - 25 950-2050 MHz 23