Beckwith Electronics

Hamburg, Illinois 62045
(618) 232-1139

(618) 232-1172 fax

Contact Us

Aries Electronics

Aries DIP programmable headers offer unusual versatility for programming within the header itself.
They can be individually programmed using cutters or Aries' programming tool, Part No. T-675, available seperately, to remove the interconnecting sections. Consult Data Sheet No. 2002 for Aries' programming tool.
Adjacent and/or opposing pins are interconnected until the pre-slotted section is programmed out. An almost infinite number of programs can be attained by merely leaving or removing interconnecting sections.
A low profile, snap-on cover protects header from dirt or accidental damage and can be marked to identify the program within the header.

Header body and cover are red UL 94 - HB Glass-filled Nylon. Consult Beckwith Electronics for UL 94V-0 rated material.
Pins are Brass Alloy, 3/4 hard.
Pin plating is either 100 u [2.54 um] Tin per MIL-T-10727 or 10 u [.25 um] Gold per MIL-G-45204 over 50 u [1.27 um] min. Nickle per QQ-N-290.
Current rating = 2 Amps.
Operating temperatures:
     = 221°F [105°C] Tin plating,
     = 257°F [125°C] Gold plating.

Suggested PCB hole size =.035 + .002 [.89 + .05] dia.

"A"= (No. of Pins per Row X .100 [2.54] ) + .050 [1.27]
"B"= (No. of Pins per Row - 1) X .100 [2.54]

Series 675
DIP Program Headers

Selection Table and Drawings


4 Pins
Tin Plating